This high-strength 2-part adhesive in the practical twin cartridge with static mixing tube achieves constructional force-locked connections with an excellent heat and weather resistance. Because of its wide adhesion spectrum, this adhesive can be used for a lot of different application fields, e.g. in the dry construction for the friction-locked joint bonding of gypsum fibre boards and granulate cement plates and can be applied for joints with a width between ≥3mm and ≤8mm.

TEST REPORTS
■ corner angle bonding in the aluminium window manufacturing
tested by the ift-Rosenheim (institute for window technique), test report no. 50924109/1 of 25th June 2001 "Examination of the resistance to tensile strength of bonded frame corners of aluminium-compound profiles at different temperatures and after diverse conditions of storage".

■ wide adhesion spectrum to different building materials
■ high bonding strength
■ controlled hardening up
■ large gap bridging
■ easy handling thanks application by means of the twin cartridge with static mixing tube
■ long processing time
■ thixotropic, does not drop
■ good weather resistance
■ solvent-free
■ suitable for the injection procedure in the window manufacturing
■ can be painted after the hardening up
■ later powder-coating possible

■ bonding of aluminium corner angles into anodised or powder-coated cover- and wing frame profiles for the aluminium window-, door- and façade manufacturing
■ joint bonding of gypsum fibre boards
■ bonding of different material surfaces, e.g. wood, laminate, glass fibre reinforced plates GRP/GFK (smoothened) and aluminium.
■ GRP/GFK-sandwich superstructures in the vehicle construction
■ filling of assembly joints of up to 8 mm width
■ restoration of damaged joints